Battery replacement

Thank you for purchasing our product! Replacing the CR2032 battery in your device is quick and easy. Follow the steps below:

Tools Required:

• Flathead screwdriver

Instructions:

1. Locate the Notch: Find the small notch on the side of your device. This is where you will insert the flathead screwdriver.

2. Open the Device: Insert the tip of the flathead screwdriver into the notch and gently pry the device open. Be careful not to apply too much force to avoid damaging the enclosure. The two halves of the device will separate, and the old battery should fall out.

3. Insert the New Battery:

   • Take a new CR2032 battery.
   • Place it into the half of the device that contains the circuit board. Ensure the + side of the battery is facing up.

4. Close the Device:

   • Align the two halves of the device.
   • Push them together firmly until you hear a click and the device latches shut.
   • Check that there is no gap between the halves to ensure a proper seal.

Safety Tips:

• Dispose of the old battery responsibly, following local recycling regulations.
• Avoid touching the battery terminals with your fingers to maintain optimal performance.

If you have any questions or need further assistance, please contact our support team.